Light House – MAX & MAX XL Range – Professional Grow Tents
LightHouse® MAX Core Specification:
Heavy duty Tri Layer 600 Denier material with the special LightHouse® UltraLux reflective liner
Quality Tivax double lined zips that are easy-to-use with no snagging and offering good light-proofing
Frame – 25mm steel poles with welded metal corners – offering ultimate strength and durability
All outlets for air and cables are double lined and light tight with pull toggles on each lining
All larger air out socks benefit from outer attachable Velcro covers to stop light when not in use
Roof poles with rubber ends for strong grip
Two waterproof insert tray
Velcro handy straps for securing cables and wires
Door clips on all doors for fastening when open
Size: 2m x 2m x 2m
Pole size: 25mm
4 options on air out, through the roof or side
2 x one piece waterproof insert tray
1 x base side air in with a 300mm (12”) ducting gland
4 x inline 300mm (12”) socks for use with air-cooled lighting
4 x 100mm (4”) cable glands
6 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
2 x side doors, plus large rear door for easy access to crop
8 x Filter straps
NOTE:
This tent will hold a fan inside the 300mm socks. On this model, access from the front can either be by using the two inner curved doors or if full access is required, just zip the entire front off!
Additional MAX Features:
Strong, reliable poles with welded metal corners
LightHouse® MAX frames are some of the best on the market, benefitting from metal welded corners and 22mm to 25mm diameter steel poles for the ultimate in strength
Size: 2.4m x 2.4m x 2m
Pole size: 25mm
4 options on air out, through the roof or side
2 x one piece waterproof insert tray
1 x base side air in with a 300mm (12”) ducting gland
4 x inline 300mm (12”) socks for use with air-cooled lighting
4 x 100mm (4”) cable glands
6 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
2 x side doors, plus large rear door for easy access to crop
8 x Filter straps
Recommendations:
Exhaust fan around 1400m3
NOTE:
This tent will hold a fan inside the 300mm socks. On this model, access from the front can either be by using the two inner curved doors or if full access is required, just zip the entire front off!
Additional MAX Features:
Strong, reliable poles with welded metal corners
LightHouse® MAX frames are some of the best on the market, benefitting from metal welded corners and 22mm to 25mm diameter steel poles for the ultimate in strength
Size:3m x 3m x 2m
Pole size: 25mm
4 options on air out, through the roof or side
2 x one piece waterproof insert tray
1 x base side air in with a 300mm (12”) ducting gland
4 x inline 300mm (12”) socks for use with air-cooled lighting
4 x 100mm (4”) cable glands
6 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
2 x side doors, plus large rear door for easy access to crop
8 x Filter straps
Recommendations:
Exhaust fan around 1400m3
NOTE:
This tent will hold a fan inside the 300mm socks. On this model, access from the front can either be by using the two inner curved doors or if full access is required, just zip the entire front off!
LightHouse – MAX 3m – 3m x 2m x 2m
Size: 3m x 2m x 2m
Pole size: 25mm
4 options on air out, through the roof or side
2 x waterproof insert tray
1 x base side air in with a 300mm (12”) ducting gland
4 x inline 300mm (12”) socks for use with air-cooled lighting
4 x 100mm (4”) cable glands
6 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
2 x side doors, plus large rear door for easy access to crop
8 x Filter straps
Recommendations:
Exhaust fan 150mm (6")
NOTE:
This tent will hold a fan inside the 300mm socks. On this model, access from the front can either be by using the two inner curved doors or if full access is required, just zip the entire front off!
Size: 1.5m x 1.5m x 2.2m
Pole size: 25mm
2 options on extraction via roof or side
2 x inline 300mm (12”) socks for use with air-cooled lighting
2 x 100mm (4”) cable glands
3 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
2 x side doors for easy access to plants
4 x Filter straps
Recommendations:
Minimum extraction fan size 125mm (5")
LightHouse – MAX XL 3m – 3m x 1.5m x 2.2m
Size: 3m x 1.5m x 2.2m
Pole size: 25mm
4 options on extraction via roof or side
4 x inline 300mm (12”) socks for use with air-cooled lighting
4 x 100mm (4”) cable glands
6 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
2 x side doors for easy access to plants
8 x Filter straps
Recommendations:
Minimum extraction fan size 150mm (6")
Size: 3m x 3m x 2.2m
Pole size: 25mm
4 options on extraction via roof or side
4 x inline 300mm (12”) socks for use with air-cooled lighting
4 x 100mm (4”) cable glands
6 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
2 x side doors for easy access to plants
8 x Filter straps
Recommendations:
Minimum extraction fan size 200mm (8")