Description
Vitalink Max Bloom HW A&B 1 Litre
Vitalink Max is one of the most popular hydroponic nutrients on the market today.
It’s no wonder that so many growers use Vitalink Max!
Using Vitalink Max Bloom HW A&B:
Use from the third week of the flowering cycle to the last week before harvest. Fill your recirculating or run-to-waste hydroponic system reservoir with water and add equal amounts of Vitalink Max Bloom Part A and Vitalink Max Bloom Part B to the tank to achieve the required strength and mix well. Vitalink recommend using 3-4ml/Litre of both part A and part B to achieve a CF of 15-23.
We recommend using a syringe or beaker for accurate measurement of this product and a CF/EC/PPM meter such as the Bluelab Truncheon to check the TDS. Adjust as necessary. Next, add any additives and boosters you wish to use and again mix well. Adjust the pH of the solution to the required level using pH up or down as necessary. We recommend the use of a pH meter such as the Horticare pH meter to help accurately set the pH to the required level. It is recommended you renew the nutrient solution in your reservoir every 7 days.
Both parts of a 2-part nutrient are designed to be used together in equal amounts. Using only part A or part B, or using them in unequal amounts will result in a nutrient solution which is not properly balanced. This will almost certainly lead to your plants suffering from deficiencies.
As with all nutrients, boosters and additives, never mix them together in their concentrated form (i.e. straight out of the bottle). Always add each nutrient, booster or additive to your reservoir or feed water in turn, giving the solution a good stir to mix it in before adding the next one
Vitalink Max Bloom HW recommended dosage – 3-4ml/Litre of both Parts A & B
Vitalink Max Bloom HW recommended pH range – 5.5-6.2
Vitalink Max Bloom HW Part A&B combined NPK – 5-4.6-9.6
Reviews
There are no reviews yet.