Lumatek – Ultimate Pro 600W&1000 400V & CMH Ballasts 315W & 630W plus Bulbs
LUMATEK Ultimate Pro 600W 400V Dimming Range (W): 400W – 400SL – 600W – 600S
The Lumatek Ultimate Pro 600 has been specifically designed to help the hobby grower access the benefits of using electronics to control and power both 240V MH/HPS and professional 400V HPS horticultural lamps. The Lumatek Ultimate Pro automatically detects the lamp connected and then powers that light. A Lumatek 600W 400V HPS lamp is supplied with the ballast. The 400V lamps are superior to the 240V lamps traditionally used in the hobby hydroponics and indoor garden markets due to their increased efficiency and greater PAR spectrum output. Photosynthetic Active Radiation (PAR) refers to the part of the light spectrum that plants actually use to photosynthesize and make energy to grow.
The Lumatek Ultimate 600 is a remote electronic ballast that will plug into standard 240V mains supply and power 600W 400V HPS and 400W/600W 240V MH/HPS grow lamps. This ballast has an IEC connector on the lamp cable and can connect to any regular reflector. This intelligent digital ballast can easily integrate into your existing grow room; simply replace your ballast with the Lumatek Ultimate 600 and it will automatically detect which type of lamp you are using and provide precise voltage required for optimum PAR spectrum output. If you are powering a 600W 400V grow lamp, you will instantly achieve more useable grow light! More light = more yield!
Features:
Voltage regulator precision; as well as automatically detecting which voltage lamp is being used, the microprocessor and software controlled electronics monitor and sense the lamp and it’s current state of degradation ensuring the lamp receives the precise voltage necessary to achieve optimum PAR spectrum output (the actual part of light that plants use to photosynthesize) regardless of mains supply voltage fluctuations.
Soft Start; when ballast is switched on, the software controlled electronics manage and control inrush current so as to prevent initial surge tripping circuit-breakers and protect and enhance lamp-life. The ballast will bring the lamp to full brightness within three minutes.
End of lamp-life; the ballast will monitor and sense when the lamp is coming to the end of it’s useable life and will not attempt to ignite it thus avoiding negative spectral and colour anomalies.
No noise; the Lumatek ballast is completely silent and produces no vibration due to using the graduated fin design of the case as a heat sink which negates the need for an internal fan.
Less heat; the ballast is extremely efficient and very little energy is lost as waste heat.
LUMATEK Pro 1000W 400V Controllable
This is our most powerful intelligent 1000W ballast which integrates the proven and reliable Lumatek technology and with an addition of Control capability. The LUMATEK Pro 1000W 400v Controllable has been developed to connect to 240V power supply and light 600/750/1000W 400V HPS grow lamps.
400V grow lighting is now standard in professional horticulture because of the extra PAR/PFF (grow light) produced with greater efficiency and lower energy costs. Improved PAR Light ensures a constant and uniform plant growth.
Developed to meet professional standards & main requirements of the grower:
Additional PAR/PFF – up to 10% more grow light
More light = more yield/revenue
Improved PAR Light Output maintenance
Highest System Efficiency
High reliability
low energy costs
Affordable price – little more than standard 240V equipment
Connect to 240V power supply and light 400V Double Ended horticultural grow lights
Lumatek use the latest electronic components to improve performance & efficiency to reduce the cost of high-end professional equipment for the end user.
Lumatek Pro ballasts are tested and compatible with 400V DE HPS lamps from all leading manufacturers including Phillips. Comparison testing has demonstrated up to 10% more PAR/PFF than standard horticultural lamps with improved PAR light maintenance levels.
LUMATEK 315W CMH
This reliable digital ballast has been successfully used in cultivation facilities around the word and uses square wave technology to efficiently fire and operate 315W Ceramic Metal Halide (also known as CMH/CDM/LEC) lamps.
CMH technology creates high energy PAR/PPF levels with low heat at full spectrum which is closer to sunlight and produces healthier plant growth and larger yield. With a CRI (Colour Rendering Index) of >90%, CMH is perfect for growing high quality produce and essential oil extraction.
This ballast is for use with Lumatek 315W CMH lamp (4200K Daylight and 3100K Agro available) and is also compatible with Phillips. For safety this ballast uses full circuit protection including open/short circuit, over temperature, over/low voltage, end of lamp life/rectification and EMI suppression.
Ballast is dimmable for optimum control.
More Light – Less Heat – Full Spectrum – More Yield
315W CMH Bulb
This pulse-start lamp has been engineered for use with Lumatek 315W CMH electronic ballast and is produced using high-grade ceramic arc tube technology and specific horticultural gas blend that creates optimal spectral output for healthy plant growth.
CMH technology creates high energy PAR/PPF levels with low heat at full spectrum which is closer to sunlight and produces healthier plant growth and larger yield. With a CRI (Colour Rendering Index) of >90%, CMH is perfect for growing high quality produce and essential oil extraction. Lumatek 315W Ceramic Metal Halide (also known as CMH/CDM/LEC) lamps are available in 4200K Daylight and 3100K Agro formats.
The PCA ceramic arc tube permits the lamp to operate at higher internal temperatures increasing colour rendering, output and efficiency. PCA resists interaction with the chemicals inside the tube which stabilizes the chemical mix over the life of the lamp, thereby improving colour consistency and PAR/PPF level maintenance. Pulse-start technology enables faster start up & restrike time, longer lamp life and increased lumen maintenance.
Lumatek 630W Controllable & Dimmable Electronic CMH Ballast
Lumatek presents the 630W Controllable & Dimmable CMH Ballast. This reliable digital ballast has been successfully used in cultivation facilities around the word and uses high frequency technology to efficiently fire and operate 630W Double-Ended (DE) Ceramic Metal Halide (also known as CMH/CDM/LEC) lamps.
CMH technology creates high energy PAR/PPF levels with low heat at full spectrum which is closer to sunlight and produces healthier plant growth and larger yield. With a CRI (Colour Rendering Index) of >90%, CMH is perfect for growing high quality produce and essential oil extraction.
This ballast is for use with Lumatek 630W DE CMH lamp (4200K Daylight and 3100K Agro available).
For safety this ballast uses full circuit protection including open/short circuit, over temperature, over/low voltage, end of lamp life/rectification and EMI suppression.
The new addition of Control capability allows you to easily monitor and regulate your grow room environment (Lighting timming, sunrise/sunset, digital 1% dimming, etc). By simply connecting the Lumatek Digital Panel (sold separately) into the TRS “Link” port on your controllable ballast.
More Light – Less Heat – Full Spectrum – More Yield
630W DE CMH Bulb
This Double-Ended (DE) high frequency pulse-start lamp has been engineered for use with Lumatek 630W DE CMH electronic ballast and is produced using high-grade ceramic arc tube technology and specific horticultural gas blend that creates optimal spectral output for healthy plant growth.
CMH technology creates high energy PAR/PPF levels with low heat at full spectrum which is closer to sunlight and produces healthier plant growth and larger yield. With a CRI (Colour Rendering Index) of >90%, CMH is perfect for growing high quality produce and essential oil extraction. Lumatek 630W Double-Ended (DE) Ceramic Metal Halide (also known as CMH/CDM/LEC) lamps are available in 4200K Daylight and 3100K Agro CCT formats.
Double-ended CMH lamps are more stable than traditional, single-ended Metal Halide (MH) lamps and this allows them to have an increase in light intensity and PAR/PPF output of up to 50% compared with similarly powered standard MH lamps.
The PCA ceramic arc tube permits the lamp to operate at higher internal temperatures increasing colour rendering, output and efficiency. PCA resists interaction with the chemicals inside the tube which stabilizes the chemical mix over the life of the lamp, thereby improving colour consistency and PAR/PPF level maintenance. Pulse-start technology enables faster start up & restrike time, longer lamp life and increased lumen maintenance.
