Lumatek – Ballast Dimmable 250W/400W/600w/1000W & Twin 600W 240v Hps Controller

£79.99£244.95

Clear
 SKU: CAM192743040028  Categories: ,
 EAN:
EAN:

Description

Lumatek – Ballast Dimmable 250W/400W/600w/1000W & Twin 600W – 240V – Light Kit

 

Lumatek – 250W 240V – Electronic ballast for 150W,175W or 250W HPS or MH lamp
High performance with low power consumption and operating cost make the LUMATEK 250W a great ballast for beginner and professional growers of light-sensitive crops.

A ballast is necessary to light high intensity discharge (HID) lamps such as high pressure sodium (HPS) and metal halide (MH) grow lamps. Depending on the type of crop and light cycle required, ballasts run continuously 8 – 24 hours a day and must therefore be as efficient as possible. With less energy wasted as by-product heat Lumatek ballasts create more light from less energy consumed.

Conventional core & coil magnetic ballasts waste a large proportion of the energy consumed as by-product heat, can experience a reduction in performance over time and can even catch fire through extended use.

Selecting the Super Lumens (SL) switch setting on Lumatek ballasts boosts power output to HPS lamps by 10% increasing luminosity and PAR/PPF levels. We do not recommend dimming or boosting MH lamps which should be matched with the same power setting (eg. 250W lamp at 250W and 150W lamp at 150W setting).

Lumatek ballasts are supplied complete with fixed-cable connectors ready for immediate use ‘plug & play’.

 

Lumatek – 400W 240V – Electronic ballast for 250W or 400W HPS or MH lamp
umatek 400W digital ballasts are dimmable and produce consistent stable light output which is ideal for pharmaceutical agriculture, controlled-environment horticulture and other uses where precise regulated output is essential.

Lumatek ballasts are microprocessor-controlled and feature intelligent start with sequential switching to light lamp faster with safe management of inrush current and balanced load across ring circuit to avoid tripping breakers. When dimming or boosting lamp the ballast uses ’soft dim feature’ to change power output gradually to protect lamp.

Lumatek 400W digital ballast is extremely efficient producing very little heat and for safety uses full circuit protection including open/short circuit, over temperature, over/low voltage, end of lamp life/rectification and EMI suppression.

Four power-output settings at 250W, 250SL, 400W & 400SL. Boost power by 10% by selecting SL settings.

 

Lumatek – 600W 240V – Electronic ballast for 250W, 400W & 600W HPS or MH lamps
The Lumatek 600W digital ballast provides a stable precise voltage to the lamp creating a higher PAR/PPF output and yet is far more energy efficient than most other ballasts on the market. The latest high output 600W horticultural ballasts from Lumatek are designed to give high yeilds of top quality results, year after year.

Featuring 4 different settings from 250w to 660W, Lumatek Digital ballasts can be used progressively to give the optimum performance for each stage of your grow and can be used with both high pressure sodium or metal halide lamps.

The proven robust Lumatek 600W Digital Ballast uses best quality components and is so reliable it comes with free 5 year guarantee. Featuring intelligent start up and soft-dimming facility the Lumatek 600W runs extremely efficiently generating much less heat than other conventional ballasts and runs silently.

As with all Lumatek Ballasts, the latest Lumatek 600w Digital Ballast uses full circuit protection including open/short circuit, over temperature, over/low voltage, end of lamp life/rectification and EMI suppression.

 

Lumatek – Twin 600W 240V – Electronic ballast for independent control of 2 x 400W/600W HPS & MH lamps.
The Lumatek Twin 600 is two 600W dimmable multi-watt electronic ballasts housed in one case and designed to be able to power and control two HPS or MH horticultural lamps independently.

This unit features two separate lamp leads with IEC and two separate output power controllers with four different power settings enabling dimming and boosting power or selecting specific output for different rated lamps.

The Twin 600 also has separate safety and auto-recovery with full independent circuit protection for each lamp. As well as being better value than purchasing two separate ballasts, the Twin 600 is able to drive two separate lamps but only requires one power supply plug socket!

Power & control two separate 240V grow lights independently
– Better value than buying two separate ballasts
Power & control 600W, 400W & 250W HPS & MH horticultural lamps for indoor growing
Requires only one mains plug socket for power supply
Full independent circuit protection for each lamp.
 Voltage regulator electronics ensure precise lamp voltage for producing optimum PAR spectrum (PPF/PPFD) regardless of mains voltage fluctuations
Extra 10% power boost from ‘Super Lumens’ switch Dimming switch for enhanced environmental-parameter control
 Intelligent start algorithm to prolong lamp life and prevent multiple unit ignition from tripping circuit breakers
 Ultra-high operating frequency produces better quality light and ensures against strobe flicker
 Cost savings from improved efficiency; more light is produced per watt of energy consumed

 

Lumatek – 1000W 240V – Electronic ballast for 1000W, 750W or 600W HPS lamp or 1000W or 600W MH lamp
Introducing the amazing new 1000W Lumatek Digital Ballast. This state of the art digital lighting ballast is one of the most powerful and reliable digital ballasts currently available today. With 30% more lumens than a standard magnetic ballast, the Lumatek 1000w actually uses far less energy too – making it more economic to run and giving higher yields than previously possible.

Featuring 4 different settings, including Super Lumens boost – the Lumatek 1000w Digital Ballast can be used progressively to give the optimum performance for each stage of your grow and can be used with both high pressure sodium or metal halide lamps.

This fantastic Dimmable Digital Ballast is so reliable it comes with an amazing 5 year guarantee and for safety uses full circuit protection including open/short circuit, over temperature, over/low voltage, end of lamp life/rectification and EMI suppression. The Lumatek 1000W also features a fast start up facility and generates much less heat than other conventional ballasts. Enjoy longer bulb-life too with this high capacity digital ballast, as the Lumatek 1000w is incredibly stable and reliable, ensuring unbeatable grow room results.

 

 

Additional information

Wattage

Dimmable 150W to 1000W

Brand

Lumatek

Type

HPS (High Pressure Sodium)

MPN

Does Not Apply

Country/Region_of_Manufacture

Netherlands

Installation_Area

Indoor

Reviews

There are no reviews yet.

Be the first to review “Lumatek – Ballast Dimmable 250W/400W/600w/1000W & Twin 600W 240v Hps Controller”

Your email address will not be published. Required fields are marked *