Description
Light House – LITE Range & Clone 1 (Propagator tent) – Hobby Grow Tents
LightHouse® LITE Core Specification:
Tri Layer 210 Denier material with the special LightHouse® UltraLux reflective liner
Quality Tivax double lined zips, easy-to-use with no snagging and offering good light-proofing
Main frame made from 16mm steel poles with nylon corners
One piece waterproof insert tray
All outlets for air and cables are double lined and light-tight with pull toggles on each lining
2 x Filter straps
Door clips on all doors for fastening when open
LightHouse LITE CLONE 1 – 0.7m x 0.9m x 0.5m
2 tents in one, on its side it’s a propagation tent, stand upright and move the lighting bars to have a great little stock plant tent.
Size: 0.7m x 0.9m x 0.5m
Air extraction through the roof via a 125mm (5”) sock
1 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
LightHouse LITE 0.6m² – 0.6m x 0.6m x 1.7m
Size: 0.6m x 0.6m x 1.7m
Air extraction through the roof via a 200mm (8”) sock
2 x inline 200mm (8”) socks for use with air-cooled lighting
2 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
1 x intake vent with 200mm (8") Sock
Recommendations:
For single lamp set up – 250w HID or 250w CFL
Exhaust fan size – 100mm (4")
LightHouse LITE 1m² – 1m x 1m x 2m
Size: 1m x 1m x 2m
Air extraction through the roof via a 250mm (10”) sock
2 x inline 250mm (10”) socks for use with air-cooled lighting
2 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
1 x intake sock 250mm (10")
Recommendations:
Ideal for use as a drying storage environment when used with DryNet
For single lamp set up – 400w HID or 400w HPS
Exhaust fan around 350m3
LightHouse LITE 1.2m² – 1.2m x 1.2m x 2m
Size: 1.2m x 1.2m x 2m
Air extraction through the roof via a 250mm (10”) sock
2 x inline 250mm (10”) socks for use with air-cooled lighting
2 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
1 x intake sock 250mm (10")
Recommendations:
For single lamp set up – 600w HID or 400 HPS
Exhaust fan around 440m3
LightHouse LITE 1.5m² – 1.5m x 1.5m x 2m
Size: 1.5m x 1.5m x 2m
Air extraction through the roof via a 250mm (10”) sock
2 x inline 250mm (10”) socks for use with air-cooled lighting
2 x low level passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
1 x intake vent with 250mm (10") sock
Recommendations:
Ideal for use with the LightHouse® DryNet
For single lamp set up – 1000w HID or 600w HPS or 2x 400W HPS
Exhaust fan 125mm
LightHouse LITE 2.4m – 2.4m x 1.2m x 2m
Size: 2.4m x 1.2m x 2m
Air extraction through the roof via a 250mm (10”) sock
2 x inline 250mm (10”) socks for use with air-cooled lighting
2 x passive air fine (anti-mite) mesh vents at base with light-proof covers when not in use
1 x intake sock 250mm (10")
Recommendations:
Two lamp set up – 2 x 600w HID
Exhaust fan around 700m3
Reviews
There are no reviews yet.