GAS – Ec Speed Controller/EC1 Controller & EC Fan Controler/Fan Balancer

EC Speed Controller
The GAS EC speed controller is the perfect way to control the speeds of two EC fans.
Powered from the fan there is no need for a power pack.

Precisely set your intake fan speed
Control the maximum speeds of two fans
Precisely set your outtake fan speed
Balance your fans, to achieve the required negative pressure
Plugs directly onto Systemair’s EC fan range
Must be connected using Active Cables

EC1 Controller
The GAS EC1 thermostatic speed controller is the perfect way to control your outtake EC fans.
With a minimum and maximum speed control and powered from the fan, there is no need for a power pack.

Temperature control your fan
Set maximum fan speed to reduce running costs and reduce noise
Set minimum fan speed.
Keep air fresh and CO2 rich
Plugs directly onto Systemair’s EC fan range
Must be used with Active Cables

Cable Pack 8
Active cables for GAS active fan controllers.
The white active cables have all three pins connected, it has a power cable from the fan. This means the controllers can be powered from the fan without being connected to the mains, meaning less plugs needed in your grow room. Compatible with all our controllers.
You must use active cables with controllers that are designed for Active Cables, these have white connections.

5 metre male/male active connector cable
For use with SystemAir EC Fans

Cable Pack 9
Active cables for GAS active fan controllers.
The white active cables have all three pins connected, it has a power cable from the fan. This means the controllers can be powered from the fan without being connected to the mains, meaning less plugs needed in your grow room. Compatible with all our controllers.
You must use active cables with controllers that are designed for Active Cables, these have white connections.

Y Active Splitter cable
For use with SystemAir EC Fans

EC Controller
The GAS digital EC fan controller provides the ultimate control over Systemair EC fans.
This controller not only thermostatically controls your intake and exhaust fans, but reacts intelligently to changes in temperature. The Reactive Temperature Technology ‘RTT’ actively monitors and adjusts fan speed. This saves energy and reduces wear on your ventilation system. The EC fan controller can be coupled to a fan balancer to give you the ultimate control over your intake and exhaust fans.

EC Balancer
The GAS EC fan balancer gives you the ability to fine tune Systemair EC fans.
You can control maximum fan speeds of both intake and exhaust fans with the balancer. Precision control of the negative pressure within your room is simple with the balancer. Always set the outtake fan higher than the intake fan to stop positive pressure ever occurring in your grow room environment.
Designed in Germany to work with our EC fan controller.

Cable Pack 1
Y Splitter
5 metres male/male connections
For use with GAS EC Controllers and Balancers

Cable Pack 2
5 metre male/male connector cable
For use with GAS EC Controllers

Cable Pack 3
Y Splitter cable
For use with GAS EC Controllers

Cable Pack 4
2 metre male/female balancer extension cable
For use with GAS EC Controllers

Cable Pack 7
2 metre female/female extension cable
For use with GAS EC Controllers